 |
W90-114
TONTR
W90-114
Stainless Steel Elbow
Groove connection
1"~12"
Qingdao, China
40MPa
60000 tons/year
Regular is red/Can Customize
Tontr 4 in 500 PSI 90 Degree Grooved Elbow for fire fighting equipment
Our product:
Tontr Grooved couplings and fittings are used in assembly of grooved piping systems.
They are available in painted and galvanised finishes and are FM, UL approved.
The Tontr type 90 elbows are pressure rated to 500psi and are used when a change or direction is required in the pipework.
They can be used in standard and thin walled pipes.
SIZE RANGE:DN25 to DN300 (1" to 12")
MAXIMUM WORKING PRESSURE Up to 34.4 bar (500 psi)*/3.4MPa
RADIUS TYPE：Standard
MATERIAL：Ductile Iron
FINISH：Red painted or Galvanised
APPROVALS：FM Approved, UL Listed
These fittings are suitable for interconnecting piping, valves and other components in both wet and dry automatic sprinkler systems.
Installation should be according to applicable sprinkler system fabrication rules.
These rules limit the minimum size of sprinkler piping to 1 in.
FM Approved pipe fittings of smaller sizes are intended for use as valve trim, gauge connections, and for other peripheral service.
The water flow path of the sprinkler system cannot be designed using smaller sizes than 1 in.
Unless otherwise noted in the listing, these fittings have 175 psi
The maximum ambient temperature to which these fittings should be subjected is 225°F (107°C)
Tontr 4 in 500 PSI 90 Degree Grooved Elbow for fire fighting equipment
Our product:
Tontr Grooved couplings and fittings are used in assembly of grooved piping systems.
They are available in painted and galvanised finishes and are FM, UL approved.
The Tontr type 90 elbows are pressure rated to 500psi and are used when a change or direction is required in the pipework.
They can be used in standard and thin walled pipes.
SIZE RANGE:DN25 to DN300 (1" to 12")
MAXIMUM WORKING PRESSURE Up to 34.4 bar (500 psi)*/3.4MPa
RADIUS TYPE：Standard
MATERIAL：Ductile Iron
FINISH：Red painted or Galvanised
APPROVALS：FM Approved, UL Listed
These fittings are suitable for interconnecting piping, valves and other components in both wet and dry automatic sprinkler systems.
Installation should be according to applicable sprinkler system fabrication rules.
These rules limit the minimum size of sprinkler piping to 1 in.
FM Approved pipe fittings of smaller sizes are intended for use as valve trim, gauge connections, and for other peripheral service.
The water flow path of the sprinkler system cannot be designed using smaller sizes than 1 in.
Unless otherwise noted in the listing, these fittings have 175 psi
The maximum ambient temperature to which these fittings should be subjected is 225°F (107°C)
