 |
S16C
TONTR
S16C
Mechanical Cross
Groove connection
1"~12"
Qingdao, China
less pressure
60000 tons/year
Regular is red/Can Customize
Tontr Ductile Iron Threaded fitting pipe fastener Mechanical Cross
Product Details:
The quick and easy outlet at any location along the pipe.
A hole drilled or cut in the pipe to receive the locating collar of the Clamp-T is all that is required.
The full, smooth outlet area provides for optimum flow characteristics.
The is specially engineered to conform to the pipe O.D. and the gasket providing a leak tight reliable seal in both positive pressure and vacuum conditions.
The maximum working pressure for all sizes is 500 PSI (34.5 bar) when assembled on standard wall steel pipe.
The provides for a branch or cross connection in light wall or standard wall steel pipe.
the connections are available in various sizes allowing greater versatility in piping design.
The rubber sealing ring located in the inner layer is arranged on the outer side of the connected pipeline.
It is matched with the groove which is rolled in advance.
The clamp is fastened on the outside of the rubber ring, and then fastened by two bolts.
Because the rubber sealing ring and the clamp adopt the special structure design which can be sealed, the groove connecting piece has the good sealing performance.
With the increase of the fluid pressure in the pipe, the sealing performance is enhanced accordingly.
Size: DN50×25~DN200×65.
Material: ductile iron
Working pressure: 20bar.
UL/FM certified.
Finished: Red/Orange …Galvanized
Tontr Ductile Iron Threaded fitting pipe fastener Mechanical Cross
Product Details:
The quick and easy outlet at any location along the pipe.
A hole drilled or cut in the pipe to receive the locating collar of the Clamp-T is all that is required.
The full, smooth outlet area provides for optimum flow characteristics.
The is specially engineered to conform to the pipe O.D. and the gasket providing a leak tight reliable seal in both positive pressure and vacuum conditions.
The maximum working pressure for all sizes is 500 PSI (34.5 bar) when assembled on standard wall steel pipe.
The provides for a branch or cross connection in light wall or standard wall steel pipe.
the connections are available in various sizes allowing greater versatility in piping design.
The rubber sealing ring located in the inner layer is arranged on the outer side of the connected pipeline.
It is matched with the groove which is rolled in advance.
The clamp is fastened on the outside of the rubber ring, and then fastened by two bolts.
Because the rubber sealing ring and the clamp adopt the special structure design which can be sealed, the groove connecting piece has the good sealing performance.
With the increase of the fluid pressure in the pipe, the sealing performance is enhanced accordingly.
Size: DN50×25~DN200×65.
Material: ductile iron
Working pressure: 20bar.
UL/FM certified.
Finished: Red/Orange …Galvanized
