 |
S17C
TONTR
S17C
Mechanical Cross
Groove connection
1"~12"
Qingdao, China
less pressure
60000 tons/year
Regular is red/Can Customize
Tontr Mechanical Cross Grooved Joint Pipe Fittings FM
Product Details:
Certificate: UL Listed / FM Approved
Standard: ANSI / UL 213
Housing: Ductile iron ASTM A536, 65-45-12
Bolt & nut: Carbon steel, detail as G72 ~ G76
Gasket: EPDM, nitrile, silicone rubber, etc.
Rated pressure: ≥ 175 psi (1.21 MPa)
Surface: Red painting / hot dip galvanized
Mechanical cross tees provide additional outlets in existing pipeline
Grooved Outlet Mechanical Cross provide an additional threaded or grooved outlet in existing piping.
For new construction, the Grooved Outlet Mechanical Cross provide a way to bypass the use of a reducing tee.
The Mechanical Tee can easily be converted to a cross.
Available sizes: 2×1 inch~10×4 inch |DN50×25~DN250×65
Working pressure: 300 PSI
CE certified
Coating: Painted /Epoxy /E-coating (Electrophoresis)/ Galvanized
The Mechanical Cross provides for a cross connection in K, L, or M copper tube.
Mechanical Crosses have a NPT female pipe thread branch.
Mechanical Cross connections are available in sizes 21 /2" x 3 /4" through 4" x 11 /2", allowing versatility in piping design.
Tontr Mechanical Cross Grooved Joint Pipe Fittings FM
Product Details:
Certificate: UL Listed / FM Approved
Standard: ANSI / UL 213
Housing: Ductile iron ASTM A536, 65-45-12
Bolt & nut: Carbon steel, detail as G72 ~ G76
Gasket: EPDM, nitrile, silicone rubber, etc.
Rated pressure: ≥ 175 psi (1.21 MPa)
Surface: Red painting / hot dip galvanized
Mechanical cross tees provide additional outlets in existing pipeline
Grooved Outlet Mechanical Cross provide an additional threaded or grooved outlet in existing piping.
For new construction, the Grooved Outlet Mechanical Cross provide a way to bypass the use of a reducing tee.
The Mechanical Tee can easily be converted to a cross.
Available sizes: 2×1 inch~10×4 inch |DN50×25~DN250×65
Working pressure: 300 PSI
CE certified
Coating: Painted /Epoxy /E-coating (Electrophoresis)/ Galvanized
The Mechanical Cross provides for a cross connection in K, L, or M copper tube.
Mechanical Crosses have a NPT female pipe thread branch.
Mechanical Cross connections are available in sizes 21 /2" x 3 /4" through 4" x 11 /2", allowing versatility in piping design.
