 |
S10-114.3
Tontr
S10-114.3
Steel pipe coupling
Groove connection
1"~24"
Qingdao, China
1.6MPa, 2.5MPa, 4MPa, 10MPa
60000 tons/year
Regular is red/customizable
EPDM/Nitrile etc.
Grooved Ductile Iron Galvanized Flexible Pipe Coupling 2.5 MPa
Material :Ductile Iron
Seal :EPDM (black)
Finish :Galvanised
Working Pressure :300 PSI (2 MPa)
Temperature Range :-30°C to +110°C
Nominal Size :1-1/2" (40 mm)
Key Specifications/ Special Features:CARBON STEEL PIPE- LOW PRESSURE GROOVED COUPLINGS,made of Cast iron / Ductile iron with carbon steel bolts and nuts. It is recommended for service up to 350 psi / 2500 kPa / 25 bar. It is the standard grooved flexible coupling, available size from DN20 (3/4”) to DN300 (12”), suitable for Sch40S cut groove pipe only.
Material Specifications:
Housing: Ductile Iron conforming to ASTEM A536
Surface finish can be:Epoxy power
Dacromet:Hot dip zinc galvanized
Rubber Gaskets: EPDM C-shaped gaskets, for cold water, hot water, rare acid, oil-free air and multiple chemical product, working temperature -50~150degree.
NOT RECOMMENDED FOR PETROLEUM MEDIUM.
NOTE: Additional gasket styles are available. Contact Tontr for details.
Bolts & Nuts: Round head, elliptoid-neck,carriage bolts, zinc covered or dacromet.
Grooved Ductile Iron Galvanized Flexible Pipe Coupling 2.5 MPa
Material :Ductile Iron
Seal :EPDM (black)
Finish :Galvanised
Working Pressure :300 PSI (2 MPa)
Temperature Range :-30°C to +110°C
Nominal Size :1-1/2" (40 mm)
Key Specifications/ Special Features:CARBON STEEL PIPE- LOW PRESSURE GROOVED COUPLINGS,made of Cast iron / Ductile iron with carbon steel bolts and nuts. It is recommended for service up to 350 psi / 2500 kPa / 25 bar. It is the standard grooved flexible coupling, available size from DN20 (3/4”) to DN300 (12”), suitable for Sch40S cut groove pipe only.
Material Specifications:
Housing: Ductile Iron conforming to ASTEM A536
Surface finish can be:Epoxy power
Dacromet:Hot dip zinc galvanized
Rubber Gaskets: EPDM C-shaped gaskets, for cold water, hot water, rare acid, oil-free air and multiple chemical product, working temperature -50~150degree.
NOT RECOMMENDED FOR PETROLEUM MEDIUM.
NOTE: Additional gasket styles are available. Contact Tontr for details.
Bolts & Nuts: Round head, elliptoid-neck,carriage bolts, zinc covered or dacromet.
