 |
S13-76.1
Tongte
Steel pipe connector
Groove connection
1-24
Qingdao, China
1.6MPa, 2.5MPa, 4MPa, 10MPa
60000 tons/year
Regular is red/customizable
EPDM/Nitrile etc.
Product Name: Wholesale Steel Grooved Fittings Pipe Coupling for Fire Fighting
Product Type : High pressure Coupling
Listings and Approvals : ISO
Sizes : 1 inch to 12 inch (DN25 to DN300)
Features:
A proven dependable method of joining pipe and an economical alternative to welding, threading, or using flanges
It is capable of pressures up to 350 psi (24, 1 bar) depending on pipe size and wall thickness when used in fire protection services
Also available with tri-seal Grade "C" EPDM gasket for dry pipe fire protection systems, vacuum systems, and freezer applications
Provides a rigid joint by firmly gripping along the full circumference of the pipe grooves
Standard Grade "A" EPDMA pre-lubricated gasket, -30°F to 150°F (-34°C to 66°C)
For Use in Fire Protection Systems
Installation method
1.First check the end of the steel pipe that needs to be connected together for burrs and defects
2.Next, apply lubricating oil to the lips and outside of the sealing rubber ring
3.Then first put a section of steel pipe into the sealing rubber ring
4.Then put the other end that needs to be connected together into the sealing rubber ring.
5.Put the housing of the coupling on the outside of the sealing rubber ring
6.Finally tighten the bolts and nuts
Product Name: Wholesale Steel Grooved Fittings Pipe Coupling for Fire Fighting
Product Type : High pressure Coupling
Listings and Approvals : ISO
Sizes : 1 inch to 12 inch (DN25 to DN300)
Features:
A proven dependable method of joining pipe and an economical alternative to welding, threading, or using flanges
It is capable of pressures up to 350 psi (24, 1 bar) depending on pipe size and wall thickness when used in fire protection services
Also available with tri-seal Grade "C" EPDM gasket for dry pipe fire protection systems, vacuum systems, and freezer applications
Provides a rigid joint by firmly gripping along the full circumference of the pipe grooves
Standard Grade "A" EPDMA pre-lubricated gasket, -30°F to 150°F (-34°C to 66°C)
For Use in Fire Protection Systems
Installation method
1.First check the end of the steel pipe that needs to be connected together for burrs and defects
2.Next, apply lubricating oil to the lips and outside of the sealing rubber ring
3.Then first put a section of steel pipe into the sealing rubber ring
4.Then put the other end that needs to be connected together into the sealing rubber ring.
5.Put the housing of the coupling on the outside of the sealing rubber ring
6.Finally tighten the bolts and nuts
