 |
S11-60.3
Tontr
S11-60.3
Steel pipe connector
Groove connection
1"~24"
Qingdao, China
1.6MPa, 2.5MPa, 4MPa, 10MPa
60000 tons/year
Regular is red/customizable
EPDM
Groove Fitting Ductile Iron Rigid Pipe Coupling
Rigid Coupling has a 60 angle pad design which constricts the housing keys into the groove around the circumference to create rigidity.
The housings slide on the angled pads rather than mating squarely. This sliding adjustment also forces the key section into opposed contact on the inside and outside groove edges create a rigid connection.
The unique “C” shape gasket performs triple sealing functions
With a tested & proven compression set and pocket volumetric, to increase the service life of the coupling.
Certificate: UL Listed / FM Approved
Standard: ANSI / UL 213C
Material: Ductile iron as ASTM A536, 65-45-12
Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
Gasket: EPDM
Temperature: ≤ 107°C
Working Pressure: 2.5MPa
Surface: Red paint/ Hot-dip galvanized
Groove Fitting Ductile Iron Rigid Pipe Coupling
Rigid Coupling has a 60 angle pad design which constricts the housing keys into the groove around the circumference to create rigidity.
The housings slide on the angled pads rather than mating squarely. This sliding adjustment also forces the key section into opposed contact on the inside and outside groove edges create a rigid connection.
The unique “C” shape gasket performs triple sealing functions
With a tested & proven compression set and pocket volumetric, to increase the service life of the coupling.
Certificate: UL Listed / FM Approved
Standard: ANSI / UL 213C
Material: Ductile iron as ASTM A536, 65-45-12
Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
Gasket: EPDM
Temperature: ≤ 107°C
Working Pressure: 2.5MPa
Surface: Red paint/ Hot-dip galvanized
