 |
S17
TONTR
S17
Mechanical Tee
Groove connection
1"~12"
Qingdao, China
less pressure
60000 tons/year
Regular is red/Can Customize
MECHANICAL-T BOLTED BRANCH OUTLET GROOVED TEE
Installation Instruction:
This product is designed for fire protection systems only.
Sizes from 2 – 8″ | DN50 – DN200
Pressures up to 363 psi | 2500 kPa | 25 bar|2.5MPa
Possess good pressure resistance, corrosion resistance, and high-temperature resistance
And it is UL and FM listed and nationally recognized standards for safety.
Available in a variety of diameters staring from 1.5*2” up to 4*6”.
Coupling halves have a similar two-part design as grooved couplings.
However, they do not require a groove but can be attached anywhere on smooth pipes.
A hole, which is oversized compared with the outlet, is drilled on the pipe.
The coupling housing with the outlet has a collar that fits into the hole preventing the coupling to move after tightening.
A rubber gasket between the collar and the pipe makes the connection completely air and water tight.
It is easy to make cross connections by using two coupling halves with the outlet.
MECHANICAL-T BOLTED BRANCH OUTLET GROOVED TEE
Installation Instruction:
This product is designed for fire protection systems only.
Sizes from 2 – 8″ | DN50 – DN200
Pressures up to 363 psi | 2500 kPa | 25 bar|2.5MPa
Possess good pressure resistance, corrosion resistance, and high-temperature resistance
And it is UL and FM listed and nationally recognized standards for safety.
Available in a variety of diameters staring from 1.5*2” up to 4*6”.
Coupling halves have a similar two-part design as grooved couplings.
However, they do not require a groove but can be attached anywhere on smooth pipes.
A hole, which is oversized compared with the outlet, is drilled on the pipe.
The coupling housing with the outlet has a collar that fits into the hole preventing the coupling to move after tightening.
A rubber gasket between the collar and the pipe makes the connection completely air and water tight.
It is easy to make cross connections by using two coupling halves with the outlet.
