 |
W90-89
TONTR
W90-89
Stainless Steel Elbow
Groove connection
1"~12"
Qingdao, China
40MPa
60000 tons/year
Regular is red/Can Customize
Tontr 3" Short Radius grooved joint wrought 90° elbow orange
Our product:
Supplied with rigid radius grooves in accordance with ANSI/AWWA .
Fittings conform to ANSI 21.10/AWWA C-110 for center-to-end dimensions and AWWA C-153 or ANSI 21.10/AWWA C-110 for wall thickness.
Available with a wide variety of coatings and linings.
Tapped fittings also available.
Tontr fittings for AWWA size pipe are supplied with rigid radius grooves in accordance with ANSI/AWWA .
Fittings conform to ANSI A21.10/AWWA for center-to-end dimensions and ANSI A21.10/AWWAfor wall thickness.
Coal tar epoxy and other coatings are also available.
Fittings are rated for working pressures to 350 psi/2400 kPa (ductile iron) in 3 – 12"/80 – 300 mm sizes and to 250 psi/1725 kPa (gray iron) in sizes 3 – 12"/80 – 300 mm, and to 250 psi/1725 kPa (ductile iron), or 150 psi/1035 kPa (gray iron) for 14"/350 mm and larger.
Grooved end base 90° elbows and base tees are available with dimensions to ANSI B16.1.
Tontr 3" Short Radius grooved joint wrought 90° elbow orange
Our product:
Supplied with rigid radius grooves in accordance with ANSI/AWWA .
Fittings conform to ANSI 21.10/AWWA C-110 for center-to-end dimensions and AWWA C-153 or ANSI 21.10/AWWA C-110 for wall thickness.
Available with a wide variety of coatings and linings.
Tapped fittings also available.
Tontr fittings for AWWA size pipe are supplied with rigid radius grooves in accordance with ANSI/AWWA .
Fittings conform to ANSI A21.10/AWWA for center-to-end dimensions and ANSI A21.10/AWWAfor wall thickness.
Coal tar epoxy and other coatings are also available.
Fittings are rated for working pressures to 350 psi/2400 kPa (ductile iron) in 3 – 12"/80 – 300 mm sizes and to 250 psi/1725 kPa (gray iron) in sizes 3 – 12"/80 – 300 mm, and to 250 psi/1725 kPa (ductile iron), or 150 psi/1035 kPa (gray iron) for 14"/350 mm and larger.
Grooved end base 90° elbows and base tees are available with dimensions to ANSI B16.1.
