Tontr Single Grooved Reducing Tee Painted/Galvanized End

Tontr Single Grooved Reducing Tee Painted/Galvanized End

Product Introduction

1.      The grooved reducing tee is made from ductile iron.

2.      Lead free orange paint is coated on the grooved pipe tee.

3. These pipe tees conform to ASTM A536 standards.

4.      Each is UL listed and FM approved.

Reducing Tees are used to connect three pieces of pipe at an angle of 90°, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.

Certificate: UL Listed / FM Approved

Standard: ANSI / UL 213C

Material: Ductile iron as ASTM A536, 65-45-12

Type: Short radius, R=0.75D

Temperature: -30°C to 300°C

Working Pressure: 300PSI (2.07MPa)

Surface: Red paint/ Hot-dip galvanized

Tee Grooved Red Pipe Fitting

RED GROOVED PIPE SYSTEMS ALLOW FOR QUICK INSTALLATION AND ARE DESIGNED FOR MINIMUM PRESSURE DROP.

Cast Fittings:

Ductile Iron Conforming to ASTM A-536

Finish:

Standard Red Colour Rust Inhibiting Paint

Optional Hot Dipped Zinc Galvanized conforming to ASTM A-153

Approvals:

LPCB Approved 1” (33.7mm O.D) up to 8″ (219.1mm O.D).

FM Approved 1” (33.7mm O.D) up to 12″ (323.9mm O.D).

UL Listed

Max Working Pressure:

34.4 Bar / 500 PSI