S17
TONTR
S17
Mechanical Tee
Groove connection
1"~12"
Qingdao, China
less pressure
60000 tons/year
Regular is red/Can Customize
Availability: | |
---|---|
TONTR 200mm Mechanical Tee – Grooved Outlet (301) JIS
Installation Instruction:
Mechanical tee grooved outlet
Mechanical tees GMG with grooved outlet can be used for any tee connection where a grooved outlet is needed.
They may be converted into a cross when necessary.
Available sizes: 2-1 – 8-4 inch
Solid threaded branch outlet design.
The following sizes are also available on request, in container: 73mm / 141,3mm / 165,1mm.
Mechanical Tee with grooved outlet (301) provides a direct branch connection at any location where a hole can be cut in the pipe.
The gasket is a pressure-responsive design that provides the seal.
Certificate: UL Listed / FM Approved
Standard: ANSI / UL 213C
Material: Ductile iron as ASTM A536, 65-45-12
Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
Gasket: EPDM
Temperature: ≤ 107°C
Working Pressure: 300 PSI (2.07MPa)
Surface: Red paint/ Hot-dip galvanized
TONTR 200mm Mechanical Tee – Grooved Outlet (301) JIS
Installation Instruction:
Mechanical tee grooved outlet
Mechanical tees GMG with grooved outlet can be used for any tee connection where a grooved outlet is needed.
They may be converted into a cross when necessary.
Available sizes: 2-1 – 8-4 inch
Solid threaded branch outlet design.
The following sizes are also available on request, in container: 73mm / 141,3mm / 165,1mm.
Mechanical Tee with grooved outlet (301) provides a direct branch connection at any location where a hole can be cut in the pipe.
The gasket is a pressure-responsive design that provides the seal.
Certificate: UL Listed / FM Approved
Standard: ANSI / UL 213C
Material: Ductile iron as ASTM A536, 65-45-12
Bolt & Nut: Carbon Steel, meeting A‐449 & A‐183
Gasket: EPDM
Temperature: ≤ 107°C
Working Pressure: 300 PSI (2.07MPa)
Surface: Red paint/ Hot-dip galvanized