TONTR
Grooved Reducer
Groove connection
1"~12"
Qingdao, China
less pressure
60000 tons/year
Regular is red/Can Customize
Availability: | |
---|---|
Tontr Manufacturers Flexible Ductile Iron Grooved Cap
Product Introduction:
TONTR size fittings are supplied with rigid radius grooves in accordance with ANSI C-606
Fittings conform to ANSI 21.10/AWWA C-110 for center-to-end dimensions and AWWA C-153 or ANSI 21.10/AWWA C-110 for wall
thicknesses
Available with a wide variety of coatings and linings
Unwelded fittings can supply tapped fittings that meet ANSI B16.1 dimension locations
Sizes from 3 – 36″ | DN80 – DN900
Pressure rated up to 350 psi | 2413 kPa | 24 bar
Material:Ductile iron Malleable iron
Standard:Grooved Ends
ANSI/AWWA C606;NAPF 400
Physical Property:Tensile strength>=350Mpa,Elongation>=10%,Hardness<=150HB
Working Pressure:ANSI/AWWA C151/A21.51;NAPF 100.
Model:Elbow,Tees,Crosses,Bends,Unions,Bushing,Lateral Braches,Sockets,Nipples,Hexagon/Round,Caps,Plugs,Locknuts,Flanges,Side outlet
Tees,Side Outlet Elbows and etc
Connection:Grooved Ends with threaded Ends
Shape:Equal,Reducing
Certificate:ISO9001,ANSI/AWWA C606;
Size:Fittings available from 3/4 – 24″ | DN20 – DN600
Application:Suitable for air, water, sewage, oil, and other liquids where owners, specifiers, and contractors express a preference in lieu of flanged fabrication.
Buyer's drawing or designs are available
Package:Cartons without pallet/Cartons with pallet/Double woven bags/Or as buyer's requirements
Delivery Details:According to the quantities and specifications of each order
Normal delivery times is from 30 to 45 days after receiving the deposit
Tontr Manufacturers Flexible Ductile Iron Grooved Cap
Product Introduction:
TONTR size fittings are supplied with rigid radius grooves in accordance with ANSI C-606
Fittings conform to ANSI 21.10/AWWA C-110 for center-to-end dimensions and AWWA C-153 or ANSI 21.10/AWWA C-110 for wall
thicknesses
Available with a wide variety of coatings and linings
Unwelded fittings can supply tapped fittings that meet ANSI B16.1 dimension locations
Sizes from 3 – 36″ | DN80 – DN900
Pressure rated up to 350 psi | 2413 kPa | 24 bar
Material:Ductile iron Malleable iron
Standard:Grooved Ends
ANSI/AWWA C606;NAPF 400
Physical Property:Tensile strength>=350Mpa,Elongation>=10%,Hardness<=150HB
Working Pressure:ANSI/AWWA C151/A21.51;NAPF 100.
Model:Elbow,Tees,Crosses,Bends,Unions,Bushing,Lateral Braches,Sockets,Nipples,Hexagon/Round,Caps,Plugs,Locknuts,Flanges,Side outlet
Tees,Side Outlet Elbows and etc
Connection:Grooved Ends with threaded Ends
Shape:Equal,Reducing
Certificate:ISO9001,ANSI/AWWA C606;
Size:Fittings available from 3/4 – 24″ | DN20 – DN600
Application:Suitable for air, water, sewage, oil, and other liquids where owners, specifiers, and contractors express a preference in lieu of flanged fabrication.
Buyer's drawing or designs are available
Package:Cartons without pallet/Cartons with pallet/Double woven bags/Or as buyer's requirements
Delivery Details:According to the quantities and specifications of each order
Normal delivery times is from 30 to 45 days after receiving the deposit