 |
S17
TONTR
S17
Mechanical Tee
Groove connection
1"~12"
Qingdao, China
less pressure
60000 tons/year
Regular is red/Can Customize
2-1/2x1-1/4 Mech Tee Grooved Pipeline Connection
Installation Instruction:
Grooved mechanical tee
⑴ Reasons to use a grooved mechanical tee：
To lead out a branch pipe with a different diameter, a mechanical tee is used in the construction process.
A groove connection and a threaded connection are two types of connections.
This type of connection is usually made for several reasons:
● Branch pipe must be installed somewhere on the main pipe.
Reducing tee can be used to lead a branch pipe out of an existing pipe of a fixed length (usually 6 meters), but the main pipe needs to be cut off.
● For the purpose of saving money.
The cost of a tee is greater than that of a mechanical tee.
Under normal circumstances, mechanical tees are used when the diameter of the main pipe is 33, and U-shaped mechanical tees are usually used between 33 and 60.
There are two ways to connect U-shaped mechanical tees: grooves or screws
they usually use 60 to 219 calibers, and they have an outer diameter of 21 to 33 inches (roughly 1/2" to 1").
The demand is not much different.
⑵ Threaded mechanical tee
The threaded mechanical tee is a very special kind of grooved pipe fittings.
It is similar to the grooved mechanical tee and is also widely used in grooved piping systems
But the branch pipe connection port of the threaded mechanical tee is connected by threads.
2-1/2x1-1/4 Mech Tee Grooved Pipeline Connection
Installation Instruction:
Grooved mechanical tee
⑴ Reasons to use a grooved mechanical tee：
To lead out a branch pipe with a different diameter, a mechanical tee is used in the construction process.
A groove connection and a threaded connection are two types of connections.
This type of connection is usually made for several reasons:
● Branch pipe must be installed somewhere on the main pipe.
Reducing tee can be used to lead a branch pipe out of an existing pipe of a fixed length (usually 6 meters), but the main pipe needs to be cut off.
● For the purpose of saving money.
The cost of a tee is greater than that of a mechanical tee.
Under normal circumstances, mechanical tees are used when the diameter of the main pipe is 33, and U-shaped mechanical tees are usually used between 33 and 60.
There are two ways to connect U-shaped mechanical tees: grooves or screws
they usually use 60 to 219 calibers, and they have an outer diameter of 21 to 33 inches (roughly 1/2" to 1").
The demand is not much different.
⑵ Threaded mechanical tee
The threaded mechanical tee is a very special kind of grooved pipe fittings.
It is similar to the grooved mechanical tee and is also widely used in grooved piping systems
But the branch pipe connection port of the threaded mechanical tee is connected by threads.
