S17
TONTR
S17
Mechanical Tee
Groove connection
1"~12"
Qingdao, China
less pressure
60000 tons/year
Regular is red/Can Customize
Availability: | |
---|---|
FM UL tontr Brand Ductile Iron Grooved Mechanical Tee
Installation Instruction:
Features:
1)Ductile iron pipe fittings
2)Finish:Paint ,Epoxy Powder,Hot Dip Galvanized,Darcromet
3)Color:Red RAL3000,Orange,Blue or Customized Colors
4)Pressure:300PSI
5)Material: Ductile Iron conforming to ASTM A536, Grade 65--45--12
6)Certificate:FM approved & UL listed
7)Gasket: EPDM
8)Bolts and Nuts: ISO 898-1class 8.8
9)Size:1"---14"
10)Application: Fluid Pipe
11)Special Pipe: EMT Pipe
12)Alloy Or Not: Non-alloy
13)Item: victaulic coupling Grooved Coupling
14)Experience: more than 10 years' experience
15)Cooperate: OEM, ODM or othen method you need
16)Abroad agency: are open now. Welcome to negotiate.
17)Band: WPT, OEM & ODM
18)Distributor: Abroad distributor is open now.
Product introduction:
Mechanical Tees are pipe fittings that are used in line of full-flow cast fittings.
The fitting is cast of ductile iron in equal halves, one half being the outlet, the other being the strap.
An over-sized hole is drilled or cut into the pipe at the location where a branch or device is needed.
The mechanical-tee assembles around the pipe, positioning its collar inside the hole and enclosing a resilient rubber gasket suitable for the piping system.
The bolts are then fastened making the branch secure.
Mechanical Tees are intended to connect piping directly to the system.
The fitting outlets are supplied with female-pipe-threads (FPT) or grooved.
These are labor saving devices which provide great flexibility and cost savings to a contractor, both in labor and materials.
No flame is required to cut the hole or assemble the mechanical-tee, making it a great choice for retrofit and MRO work.
Ductile Iron construction.
Conforms to ASTM A536
UL listed, FM Approved
Certificates:
1)FM & UL
FM UL tontr Brand Ductile Iron Grooved Mechanical Tee
Installation Instruction:
Features:
1)Ductile iron pipe fittings
2)Finish:Paint ,Epoxy Powder,Hot Dip Galvanized,Darcromet
3)Color:Red RAL3000,Orange,Blue or Customized Colors
4)Pressure:300PSI
5)Material: Ductile Iron conforming to ASTM A536, Grade 65--45--12
6)Certificate:FM approved & UL listed
7)Gasket: EPDM
8)Bolts and Nuts: ISO 898-1class 8.8
9)Size:1"---14"
10)Application: Fluid Pipe
11)Special Pipe: EMT Pipe
12)Alloy Or Not: Non-alloy
13)Item: victaulic coupling Grooved Coupling
14)Experience: more than 10 years' experience
15)Cooperate: OEM, ODM or othen method you need
16)Abroad agency: are open now. Welcome to negotiate.
17)Band: WPT, OEM & ODM
18)Distributor: Abroad distributor is open now.
Product introduction:
Mechanical Tees are pipe fittings that are used in line of full-flow cast fittings.
The fitting is cast of ductile iron in equal halves, one half being the outlet, the other being the strap.
An over-sized hole is drilled or cut into the pipe at the location where a branch or device is needed.
The mechanical-tee assembles around the pipe, positioning its collar inside the hole and enclosing a resilient rubber gasket suitable for the piping system.
The bolts are then fastened making the branch secure.
Mechanical Tees are intended to connect piping directly to the system.
The fitting outlets are supplied with female-pipe-threads (FPT) or grooved.
These are labor saving devices which provide great flexibility and cost savings to a contractor, both in labor and materials.
No flame is required to cut the hole or assemble the mechanical-tee, making it a great choice for retrofit and MRO work.
Ductile Iron construction.
Conforms to ASTM A536
UL listed, FM Approved
Certificates:
1)FM & UL